Press and Dewater
A Screw Press Screen both filters and dewaters the captured solids. This press screen has an auger that moves material through a narrowing tube. The Screw Press Screen squeezes water out of the solids as they move along. The water exits through the screen slots. Many biological treatment plants use this product for sludge thickening. The press reduces the waste volume for disposal.
High Pressure Dewatering
The product has a 2.5 bar pressure at the discharge end. The pressure squeezes the water out of the waste material. The product has a water collection tray under the screen. The tray channels the water back to the treatment plant. The product has a discharge chute at the end for the pressed solids. The solids come out with 40 percent dry content. The product has a 3 year warranty on the auger shaft. The unit has a wash system that cleans the press during operation.
Technical Data Table
|
Parameter |
Value |
|
Dewatering Pressure |
2.5 bar |
|
Solids Dryness |
40% |
|
Screw Diameter |
25 cm |
|
Screen Slot |
0.5 mm |
|
Shaft Warranty |
3 years |
Good for Sludge Treatment
A product turns wet sludge into dry manageable waste. This press screen has a 3 year warranty on the stainless steel shaft. The product has a low power draw of 3 kW per ton of solids. The unit has a flexible discharge that directs solids into a bin or bag. The product has a flow meter that tracks the incoming volume. Buy this product for your waste plant. The volume reduction will lower your disposal costs.
Hot Tags: screw press screen, China screw press screen manufacturers, suppliers, factory, DAF clarification tank, lamella tube settler, rapid gravity sand filter, Settlement Tanks Water Treatment, Tube Settling Tank, wastewater tube clarifier
